Products

Details: Category: Products; By admin; 06.Sep; Hits: 3387

We carry out different types of anti-corrosive and wear-resistant galvanic treatment, in compliance with international standard.

Cold electro-galvanized treatments
Burnishing
Nickel plating

Heat treatment on splined shafts and bushes

Our technical department is available to evaluate feasibility of any surface treatment required.

Details: Category: Products; By admin; 06.Sep; Hits: 2923

Our joints can also be customized on customer request.
Custom joints with turning, milling, internal and/or external drilling, special lengths and tolerances on request.
Our technical department is available to evaluate feasibility of any customization required, contact us for any request or information.

Details: Category: Products; By admin; 06.Sep; Hits: 3246

Stanless steel universal joints serie X to DIN 808 are entirely made of stainless steel AISI 304 (UNI X5CrNi18-1 NR 1.4301).

On request:
- stainless AISI 303 (UNI X8CrNiS18-9 NR 1.4305)
- stainless AISI 316 (UNI X5CrNiMo17-12-2 NR 1.4401)

They all consist of a star wheel core and 2 half-joints with fork ends.
The corrosion resistance is the main feature which make the X series joints suitable for aggressive environments (chemical industry, food industry, pharmaceutical industry and marine applications).
These joints also have good heat resistance, high toughness at low temperature and they are nonmagnetic.
Maximum working angle is 45° for single joints and 90° for double joints.
The X series joints are also supplied in telescopie version entirely made in stainless steel.

ALL PRODUCTS OF Joints X SeriesCATEGORY

Stainless steel single joints X SeriesDiscover

Stainless steel double joints XD SeriesDiscover

Stainless Steel Extensible Transmissions XA SeriesDiscover

Details: Category: Products; By admin; 01.Sep; Hits: 3021

Maximum working angle 45°
Maximum rotation speed 1000 rpm
Special executions on request

Download PDF

Disegno tecnico Giunti Singoli Serie G - GB

Codes and Measures

Model	Code senza cave	d	D	L2	L1	C	Code una cava	Code 2 cave	a	b	Code 2 fori quadro	Q	*SW	Weight Kg
01G	SG0S0600	6	16	34	17	8	SG0S061C	SG0S062C	2	7	SG0S062Q	6	6	0,05
02G	SG0S0800	8	16	40	20	11	SG0S081C	SG0S082C	2	9	SG0S082Q	8	8	0,05
03G	SG0S1000	10	22	48	24	12	SG0S101C	SG0S102C	3	11,4	SG0S102Q	10	10	0,10
04G	SG0S1200	12	25	56	28	13	SG0S121C	SG0S122C	4	13,8	SG0S122Q	12	12	0,16
05G	SG0S1400	14	28	60	30	14	SG0S141C	SG0S142C	5	16,3	SG0S142Q	14	14	0,20
1G	SG0S1600	16	32	68	34	16	SG0S161C	SG0S162C	5	18,3	SG0S162Q	16	16	0,30
2G	SG0S1800	18	36	74	37	17	SG0S181C	SG0S182C	6	20,8	SG0S182Q	18	18	0,45
3G	SG0S2000	20	42	82	41	18	SG0S201C	SG0S202C	6	22,8	SG0S202Q	20	20	0,60
4G	SG0S2200	22	45	95	47,5	22	SG0S221C	SG0S222C	6	24,8	SG0S222Q	22	22	0,95
5G	SG0S2500	25	50	108	54	26	SG0S251C	SG0S252C	8	28,3	SG0S252Q	25	25	1,20
6G	SG0S3000	30	58	122	61	29	SG0S301C	SG0S302C	8	33,3	SG0S302Q	30	30	1,85
6G1	SG0S3200	32	58	130	65	33	SG0S321C	SG0S322C	10	35,3	SG0S322Q	30	30	2,00
7G	SG0S3500	35	70	140	70	33	SG0S351C	SG0S352C	10	38,3	-	**	**	3,15
8G	SG0S4000	40	80	160	80	38	SG0S401C	SG0S402C	12	43,3	-	**	**	4,60
9G	SG0S5000	50	95	190	95	46	SG0S501C	SG0S502C	14	53,8	-	**	**	7,60

03GB	SGBS1000	10	16	52	26	15	SGBS101C	SGBS102C	3	11,4	SGBS082Q	8	8	0,05
04GB	SGBS1200	12	22	62	31	18	SGBS121C	SGBS122C	4	13,8	SGBS102Q	10	10	0,12
1GB	SGBS1600	16	25	74	37	21	SGBS161C	SGBS162C	5	18,3	SGBS122Q	12	12	0,20
3GB	SGBS2000	20	32	86	43	24	SGBS201C	SGBS202C	6	22,8	SGBS162Q	16	16	0,35
5GB	SGBS2500	25	42	108	54	31	SGBS251C	SGBS252C	8	28,3	SGBS202Q	20	20	0,80
6GB	SGBS3000	30	50	132	66	38	SGBS301C	SGBS302C	8	33,3	SGBS252Q	25	25	1,20
8GB	SGBS4000	40	70	166	83	46	SGBS401C	SGBS402C	12	43,3	-	**	**	2,90

(*) Not always available in stock

(**) On demand

For selection criteria see section TECHNOLOGY AND SUPPORT

Details: Category: Products; By admin; 01.Sep; Hits: 7572

JOINTS CARDAN «G» SERIES WITH SLIDING BUSHES

- for middle-low speeds and where there are shock loads
- maximum working angle 45°
- maximum rotation speed 1000 rpm
- Special executions on request

Joints are available in 2 versions:
- G version to DIN 808
- GB version to DIN 808/7551

JOINTS CARDAN «H» SERIES WITH NEEDLE ROLLER BEARING

- for high speeds and relatively low torques
- maximum working angle 45°
- maximum rotation speed 4000 rpm
- Special executions on request

Joints are available in 2 versions:
- H version to DIN 808
- HB version to DIN 808/7551

They all consist of a star wheel core and 2 half joints with fork ends. Between the pins of the star wheel and the holes of the forks, 4 wear resistant sliding bushes (for G series) or roller bearings (for H series high speed) are fitted in.
Neither lubrication nor maintenance is required for H series (high speed joints with roller bearings) as their bearings are lubricated for life.
Joints with plain bearings G series are for middle-low speeds and where there are shock loads.
For high speeds and relatively low torques types with roller bearings (H - HB) are recommended.
Both versions offer high efficiency, silent running, low friction coefficient at competitive prices.
All rubbing surfaces are hardened and ground.
Maximum working angle is 45° for single joints and 90° for double joints.
Maximum rotation speed is 1000 rpm for G series, while H series can reach 4000 rpm.
All these joints are also supplied in telescopic version.